It has been some time since my last post. But in there was a cold that put me down for a week, plus a trip to Medellin, Colombia. And our very poor Internet service hasn’t helped; I attempted to write all last week, but although we are paying $110 a month for 3 megs, the best we could get was 0.33 megs or so. Uggh. But now we have a new provider, 5 megs/$38 per month, and we are getting a good, solid, better-than-four megs, depending. I’ll call it a success!
A while back we tiled the floor in the half-bath between the living room and the master bedroom. Since then, I have tiled the counter, painted the walls, installed the sink and faucet and the toilet, hung the door, and painted the walls a light, warm gray.
I started off with a problem. A few years ago when I poured the concrete counter, I failed to make provisions for the counter to be thinner at the faucet and drain so that I could install the fasteners from below. I just didn’t know. So using a concrete drill and a hammer and chisel, I cut out two holes:
Then using slices of PVC pipe as forms, I made two, 1-inch-thick concrete doughnuts:
When the doughnuts cured, I stuck them in place with some bondo:
Later, when I tiled the counter, I filled in the gaps with mortar. Here I am starting the tile job:
We chose an iridescent blue-gray glass tile. I got lucky-as-could-be in that I didn’t have to cut a single tile! Here is the counter, the pedestal that I made out of a concrete culvert, and the rest of the bathroom all done:
One mirror above the sink and another above the toilet makes an interesting effect. A hole in the back of the pedestal allowed me to plumb the sink drain.
Here are some more bathroom photos:
We had one extra photo, a banana flower, left over from the living room; it fit well here.
It wasn’t easy to photograph a 4’x8′ bathroom without catching myself in the mirrors!
We bought the sink a long time ago on Overstock.com.
We’re good and happy to have this last really raw area of the house done!
In other news, now that the driveway is free of piles of sand and gravel, we spread an additional eight-yards of crushed gravel. Here’s Armando chipping away at one of the piles:
While Armando spread the gravel, I tackled a long-nagging project; I hung light fixtures on the columns at the front gate. Nothing fancy, but they do look good with the gate:
Another day, I welded together some rebar to make an arbor at the front of the carport/bohio. It will look great when the vines with red flowers grow up the column and across the roof:
This plant seems to have tough vines. We haven’t seen the flowers, but the guy at the nursery said that they would be red and that the hummingbirds would love them.
After a year away from her glass bead studio, Cynthia is turning out some lovely beads. Here she is working on one at her torch:
The plants are looking good. Here are a couple garden shots:
One day I caught Bob in a big yawn:
Our Medellin trip was only for five days, but here are a couple highlights — Every morning we had breakfast at a small natural food store/restaurant called Salud Pan (healthy bread). The two pictures in the next photo are hanging on their wall:We met up with my girl cousin from Massachusetts for the trip. Even after all these years, I still can’t help but pull her pigtail. Here we are at Jardin Botanico (Edit — actually, the next two photos are out of order — we are really at Parque Arvi, higher up in the mountains, hence Cynthia wearing a jacket in the cool air) :
And Cynthia and me:
Some flowers and plants at the botanical garden:
The garden isn’t just about the plants. There are lots of birds and other critters, including this gargantuan iguana (taken with a telephoto as you don’t want to get too close — these critters aren’t afraid to run at you full tilt)!
Luckily they weren’t just sunning but were kind of active. Here’s a short video:
We went to Plaza Botero again on this trip, always fun to see Botero’s work. Here is Cynthia with the cat:
Another view is like something out of a 1930’s earth invaders sci-fi movie:
It was quite warm in the plaza, so we took refuge in the air conditioned museum. I have to stop eating all those arepas!
I guess that you could call this the Botero-effect mirror.
So that’s all for now. Now Cynthia and I are pulling the last of the wiring for the master bedroom and bathroom and a few other spots. Thanks for stopping by.
As I mentioned in my last post, the long shipping container wall in the living room/dining room/entry was calling out for some art. So Cynthia and I looked through our photos and found eight pictures of flowers that we had taken around the property. I uploaded the photos to AllPosters.com and received the prints a couple weeks later.
Now what to use for frames? Easy would be to buy some frames off the shelf at Machetazo or other local store. But as you know, this whole house project isn’t about easy. So, NO!
But what? With our concrete counter tops, benches, and shelves, well, why not concrete picture frames? That sounded exciting so I got right to work.
Last time, I posted the following photo of the form work for our concrete picture frames. I still needed to apply some strips of wood to make a recess in the back of the frame to receive the glass and pictures:
After I had the forms assembled, Armando mixed a rich (more cement than normal) batch of mortar and placed it in the forms.
Two days later, I pulled the forms. The new concrete frames looked quite good, but they had air holes and honeycomb here and there. They looked even better once we applied a coat of dark-gray grout to all the surfaces that would be seen. When the grout was dry, I sanded the frames smooth.
Next, Cynthia and I, each with a sponge, walked around the table a dozen times applying 24 coats of sealer as we made our rounds around the table:
Cynthia is putting the first coat of sealer on the first frame. Notice how the sealer darkens the grout that is spread on the surface of the frames.
The next photo shows the frames all sealed, although they still need to be fine sanded and one more coat of sealer applied. These things are heavy — fifty-pounds each! My next step of the process was to drill holes in the tops of the frames, tap in some plastic expanding anchors, and screw in heavy-duty hooks.
Now with the frames ready for hanging, I moved inside the house. Armando and I screwed a 20-foot length of sliding door track high on the wall.
We chose to hang these frame-beasts with chain hanging from wheels that I inserted into the sliding door track. Here is a photo of the wheels:
Note to self: Get a manicure.
Cynthia and I cut the chain and set the glass and photos in the frames.
With everything assembled, finally, we hung the frames on the chains and we were done.
Here are some shots of the photos mounted in the frames and the frames hanging on the wall:
The largest photo is 16″x20″ plus the two-times the width (almost 4-inches) of the frame, making it about 24″x28″. They are BIG but the wall can handle it.
Here is a panorama of the entire wall:
Ignore the curvature of the panoramic photo.
Now, isn’t that better than a huge blank wall?
We couldn’t be more pleased, and the whole project — enlargements, glass, wood for the forms, screws, sand/cement/sealer, door track, wheels ($14 each and we needed 14 of them), chain, and miscellaneous bits and pieces, and Armando’s labor sits at around the $500 mark plus about six person-days of work. It couldn’t have been easier!
Plus, we have one photo/frame left to hang in the half-bath off of the living room.
Again, we were at a decision point. Now that the carport concrete floor is poured, do I send Anibal and Francisco on their way, or do we get down to business with the tile?
I thought that the slab should cure for a while, at least a week. I went online and GoogledDuckDuckGo‘d the question.
Knowledge and advice was all over the place. Two days. One week. One month. Many months. I chose to go with the person who said that by using modern mortar with polymer additives, the time shouldn’t matter much as long as the initial water was gone from the surface — the mortar will adhere well to the still-curing concrete and move with the drying floor slab and tiles won’t pop. Ask me in a year how it turned out.
So the next morning, we got to work tiling the new slab. Here are a couple photos of the completed floor:
These are the same tile that we used in the living room and bedrooms.
Note to self: I still need to paint the shop door!
Now the question is, is this area a carport or a bohio? A bohio (pronounced bo-E-o) (No Robin, it’s not B-OHIO) is an open-air structure, usually separate from the house, that is great for outdoor entertaining on a hot day in the tropics. Bohios often have facilities for barbecuing and/or cooking. Traditional bohio roofs are made of palm fronds and have a protected opening at the top to let hot air escape. You can see that my roof has this venting quality and it is actually very pleasant underneath on a hot day. The eastern exposure makes it even more pleasant on hot afternoons, not that it ever really gets that hot here in the mountains! So is it a carport or a bohio? I suppose that the answer could be, “Yes!”
We finished tiling the floor early on Thursday and I wanted the guys to finish the day or even one more day to make more of a week for them. A couple of other tile projects had been lingering on, including the half-bathroom off of the living room. That floor didn’t take long:
This photo is before grouting the floor and baseboards. I’ll tile the pedestal and the counter top before I install the sink.
And lastly, the wall under the master bathroom sinks was still just stucco. Anibal and I tacked this project while Francisco finished grouting the carport floor:
In the next photo, you can see that we didn’t tile around all the pipes. I’ll dress the area up with some aluminum covers. Stay tuned.
The next day, Friday, while I still had the tile saw set up, I decided to install the tile baseboards in the living room, master bath, laundry, and the guest bedroom. I’ve always said that a room doesn’t look done until the baseboard is installed. It is still true. Here is a photo of a row of tiles that has been grouted but I still need to run a bead of caulk along the top of the tile and touch up the paint:
Here is a strip in the second bedroom that is all done:
Bob watches the touch up paint dry.
One day, Anibal and Francisco were going great guns without me (no border tile to cut), so I decided to tackle a little unfinished project. I had never finished the top of the glass block window in the master bathroom, mainly because I didn’t know what to do with it. We did know, however, that we wanted some ventilation in the shower area next to the glass block window, and whatever I did had to keep rain out of the house. After some pondering, I figured it out.
I cut a line along the shipping container wall two-inches above the top of the glass blocks. Then I took a length of 2″x6″ steel cariola (a metal C chanel), welded ends on it, and placed it in the hole above the glass blocks. The 2″x6″ works well because it overhangs the glass blocks by about an inch on either side of the wall. I caulked it into place with urethane caulk.
The next day after the caulk had dried, I cut some window screening a foot wide and as long as the cariola. I rolled the screen into a tube and tucked it up into the space above the window. And viola! — the window now has an overhang that protects the opening from rain entering and also provides ventilation for the bathroom. The screening can be removed at any time for cleaning. I still need to prime and paint the new metal:
Lastly for this week, I started building some picture frames. The long container wall in the living/dining room is desperately pleading for some art hanging on it.
Cynthia and I went through all the photos that we have taken on the property. We chose eight pictures of flowers and uploaded them to AllPosters.com. A couple weeks later (the shipping to Panama time), the enlargements arrived.
Yesterday I measured the prints and made most of the forms for some concrete picture frames. These will be thick and heavy, and I have in mind an idea for hanging them. Stay tuned. The next photo shows my progress on the concrete forms. What, you’ve never seen concrete picture frames? Neither have we. Should be fitting for our Natural-Industrial-Bling design style. Stay tuned:
Back in October or so of last year, we came to an intermission point in installing the floor and wall tiles. Two larger projects lingered — completing the outside walkway from the front steps around to my shop, and the carport floor.
Money was one of the issues, and in the time since then we saved our pennies to buy the remaining walkway tiles. We ordered them and they just arrived. I called Hanibal and Francisco (now I have corrected Hanibal’s name to Anibal) to see if they were available and lucky for us, they were.
At day four, we have the walkway, the wheelbarrow/wheelchair ramp, and all but one of the steps down to the carport completed. Here are some photos:
Francisco prepares to mix some mortar.
Anibal places a spacer and sets the tile with a rubber mallet.
This is the walkway in front of my shop.
A nice miter turns the corner.
This walkway connects my shop to the front door of the house.
The bottom concrete step will be covered with the carport concrete floor, so there is just one step left to tile. Note to self — paint my shop door.
The tile stacked on the walkway is for the carport floor. The carport will double as a bohio, or outdoor party area. The bamboo in the planters that Armando and I made is doing very well.
In other news, remember Ramiro, the man that did a lot of welding and painting for us some months ago? We had some painting to do, and Ramiro had three days between jobs, so we invited him back to tackle the front gate. Two years is about all the time you can get out of a coat of paint fully-exposed here to the tropical sun. Ramiro sanded, primed, and painted the gate anew. Not a speck of paint on him, a very meticulous worker:
The gate is dark green, the same color as the house trim.
I don’t have a photo, but Armando has been busy in the yard, preparing for the rainy season by cleaning and digging out all the drainage ditches. He seems to enjoy grading the bottom of the ditch so that the water runs freely and doesn’t puddle (no breeding ground for mosquitoes).
Cynthia has been busy, too. Here is her latest bowl out of the kiln. She named it Antiguedad. She made the bowl with a variety of five mica powers and a small-gauge copper screen. She intentionally left the edges of the bowl “organic”. I think that it is stunning!
You can see the copper screen through the clear glass on the underside:
Nice job Cynthia!
That’s all for this 201st blog post. Thanks for stopping by.
This blog entry marks my 200th post on PanamaShippingContainerHouse.com. Cynthia and I began this house-building project on June 6th, 2010, just two-weeks away from five-years ago. And now we can see the light at the end of the tunnel!
Tackling much of this Big-Person’s Erector Set myself, I’ve had to push pretty hard, and keep on pushing pretty hard, if I ever want to see the project completed. As such, there has been a never-ending stream of items-become-reality.
I have become conditioned to frequently having something new to enjoy, appreciate, be frustrated by, and be proud of. As an artist, I like the creative process. It feeds me. It stimulates my brain.
This is not to say that it hasn’t been exhausting and that I haven’t wanted to walk away. Many times. The size of the project, the learning curve of creating a unique, owner-designed and owner-built shipping container house, the new skills that I have had to learn, plus the general decrapitude of my age (I can see 70 from my house), have been daunting.
But artists wouldn’t have it any other way, would they?
I know that the house isn’t done yet, however several readers have asked me if I would do it again — If I knew then what I know now, would I do it again. It’s a hard question to answer (indeed even some of our political elite have fallen into the trap and bungled the answer). And like a politician, I’d like to dodge the question and ask a different one.
Are we glad that we built this shipping container house? The answer, from both Cynthia and myself, is a resounding, “Yes!”
Would we do it again? (Ah, you still want me to answer that question…) “NO!” But not for the reason that you think. We think that building anything from shipping containers is a cool idea. We think that this has been a worthwhile exercise. We have learned a lot. We can’t identify any major mistakes along the way that have made this a stupid idea. We love the way that it is turning out.
But we wouldn’t do it again because we are more artists than builders. A builder can replicate the same house a thousand times, maybe flipping the floor plan every other time. But an artist — an artist is in it for the creation of new ideas, new expressions, new processes, new enlightening. So no, we wouldn’t do it again.
The house “works” for us in its design and materials. The containers provide a modular design grid that allows for a very fluid and usable living space. The large spaces, such as the 16’x40′ kitchen/family area, work well here in the tropics where airflow and ventilation is everything.
The still-somewhat-uniqueness of using shipping containers has enlivened the project, even more so than if we had built a good design from the standard concrete block method. We’ve enjoyed knowing that we’ve taken four containers out of the junk pile and up-purposed them into a home that has a lot of living potential.
Lastly, Cynthia and I have created this design from the ground up. We didn’t buy plans on the Internet, and we didn’t hire out any of the creativity. We’ve worked well together to solve really-difficult issues. Often Cynthia won’t like my ideas or I won’t like her’s.
But our philosophy around this is that if one of us doesn’t like the other’s idea, we look for a third option. We’ve discovered that the third option is never a compromise. Neither of us has had to give up anything along the way. The Third (or Fourth — or Seventh) Option that we find is always better than what either of us has thought of individually.
To everyone who has followed along, subscribed, or commented, thanks very much. I haven’t “monetized” this site because I like it the way it is. I’m not even selling the idea. This blog is my diary, and I’ve enjoyed making it public. I hope that you have enjoyed reading it.
For E.V.E.R. now, we’ve had a back door but no steps up to it (or down from it, depending on where you stand). And in the carport, we still had a small pile of mixed sand and gravel from the river. In order to pour a floor in the carport, this pile of material had to go.
So instead of moving the pile, we decided to use it up by making steps to the back door. Armando, with me helping on the technical layout and the concrete pours, spent about five days on the project. And now, just like that, we have back steps — one more item to cross off of the To Do list. Here are some photos:
The concrete slab with all the embedded rocks is where the cascade of rainwater falls from the roof.
Armando told me to make sure that I got the concrete placed right-side up.
While Armando focused on the steps, I worked the list inside the house.
We had yet to finish the wall under the bench in the master bathroom shower, so one day I couldn’t put it off any longer. This was a nasty little area because the container wall was quite dented. I wanted to attach tile-backer to the wall, but the dents wouldn’t allow it. So with Armando outside with some screws, and me inside with a couple lengths of 2″x2″ square tubing, we attached the tubing to the wall. Now with straight lines, I glued and screwed tile-backer to the tubing.
Here I am just about to attach the tile-backer:
The special screws for tile-backer are an engineering marvel. The “point” drills through the tile-backer, then into the metal stud behind the tile-backer. The two “wings” enlarge the hole in the tile-backer that the “point” made. As the wings contact the metal stud wall, they are sheared off and the screw part advances into the metal stud. Finally, when the screw head hits the tile-backer, “teeth” on the underside of the head grind away the tile-backer so that the head sits flush. Ingenious and not cheap per each:
After the tile-backer was in place, I tiled the wall and grouted it.
Next on my list was some trim work on the wall between the master bedroom and the master bath. This entire area looked was unfinished. I cut, fit, and painted some wooden boards, and now the area is transformed. Here is the bedroom side:
And the bathroom side:
I like the hand-finished texture on the wall. I still need to install towel bars, and of course, the electrical.
Beyond the bed in the bedroom is a cozy sitting area. I trimmed the top of this wall, too, and hung a fun lamp. We still need a round mirror for the wall:
In the master bath, I got to check a tiny item off of the list — I drilled a hole through the concrete shelf, passed the lamp cord through the hole, and attached a new plug. The toilet area is a pleasant place to sit a spell:
Here is a photo of the space from above:
The bedrooms were still a bit macho, so we found some nice curtains (on sale!) at Novey. Here is the master bedroom with the curtains hanging:
The vertical white stripe in the corner with all the wires will get a metal cover. The lovely antique secretary with the curved glass doors belonged to Cyn’s grandmother.
The second bedroom:
In the kitchen, morning light was just too bright coming through the glass block windows. Curtains here make the space much more pleasant:
I did a few smaller projects as well, including repainting the bottom few inches of the container wall in the kitchen. The white paint was dirtied when we grouted the floor. If you are going to build a shipping container house, realize the extra work involved here:
In the Bug-Of-The-Week Department, Cyn spotted this tropical, leaf-like camouflage take on the Praying Mantis:
With the exception of the carport floor, the last significant outside job is done. This is a good thing because the rainy season has begun. That last job was to finish the west end of container two:
Notice that the sky is no longer blue. Rain is on its way soon.
Here is this end all painted, window washed, soffit panel installed, and the scaffolding disassembled and returned to its owner after two-years:
Trim was still lacking in the two bedrooms at the top of the clerestory wall. It looked unfinished with the uneven ends of the zinc ceiling panels. So I installed a metal angle which provides a more crisp look. The next photo is looking up at the ceiling:
While I had the hang of being on ladders, Armando and I finished the kitchen ceiling by installing the last piece of zinc panel. In the seating bump-out, we hung a piece of tilebacker (no drywall in this damp climate…) on the ceiling and painted it gray. I still need to hang one of Cynthia’s red lamps:
Cat painting by our friend, Alexia.
Since I had the gray paint out, I decided to continue in the hallway to the master bedroom. Long ago primed with red and white paint, the area was very dirty. I washed the walls and ceiling, sanded and primed rusty areas, and ran beads of caulk around the door frames. I painted everything two coats of the middle gray. Now this hallway doesn’t stand out as an eyesore:
Finally, using some extra PVC pipe parts, I took a few minutes and upgraded the video surveillance cameras:
I cut a two-inch PVC elbow on an angle and glued it to another elbow. The camera fit snugly and the pipe makes a conduit to run the wire up the wall. I’ll paint the pipe the house color to make it disappear.
In the meantime, we now have about sixty-four new plants in the ground!
To the left of the driveway turnaround, we planted sixteen purple Mexican Primrose. These grow and spread well, so this area will be much fuller a few months from now. At the left side of the next photo is a new bush — I’ll build a trellis for it to vine up and over the carport entrance. It will have flowers for the butterflies and hummingbirds:
The new birdbaths are in place in the yard. Armando and I still need to apply mortar to the outside of the birdbath supports — I’d like them to look like tree trunks.
We put a row of the same Mexican Primrose along the yellow “Shrimp Tails” by the front gate. Again, these will fill in nicely:
We planted sixteen new grass plants along the west fence line. These will grow and hide the concertina security wire on the fence:
And five red-flowered trees that the butterflies and humming birds will like:The back yard is filling out nicely and is a good spot for one of the bird baths:The fern garden was doing well but looks better with the addition of a bunch of large-leaf purple plants. And we like the little flowers that Armando surprised us with:The hibiscus struggled through the dry season, and they were attacked numerous times by leaf-cutter ants. But they are doing well now that they have had a couple deep drinks of water:That’s all for now. Thanks for stopping by.
Continuing with my Big-To-Small To Do List, I painted two-coats of the medium-gray on the living room glass door frames. We moved all of Cyn’s seed beads to the loft and washed the windows. The living room is all but finished — just a light switch or two to go. We think that the living room looks pretty smart:
I painted the roof support column (it was primed black) gray, too, and it almost disappears:
We have a new Mother-In-Law Tongue in a tall planter in the far corner. It will grow a lot taller in the next few months:
After finishing the living room, I moved on to the master bedroom. It is nearly done, but I still have drop cloths and ladders by the bed so that I can put a piece of trim metal at the high-point of the ceiling. But some of the walls are photo-ready. The next photo is from the second bedroom, through the laundry room, and into the master bedroom. Gotta love the texture of the shipping container wall:
We’ve bravely and unapologetically used the same charcoal gray (dining room/staircase) in the master bedroom. Like the side table in the dining room, the table in the bedroom provides a peaceful vignette:
The table is painted dark teal but it doesn’t quite look like it on my monitor.
I’ve completed the paint in the master bedroom and have moved on to finishing some painting on the outside of the house — the rainy season is minutes away and we have had a few threatening thunder claps nearby and a few light rains. Currently I am working on the last area that I need scaffolding for — the west end of the loft:
I’ve painted the bars and am working my way up the wall. After it is painted, all I have left to do here is to cut and install a piece of metal under the soffit. I can’t wait to return the borrowed staging to its owner!
In other news, Cynthia has a new glass bowl that I would like to show off for her. The “clear” glass is “red reactive” — it reacts to the copper that is in the deep-aqua (now turned red) glass rods that she used to make the pattern. The “champagne bubbles” in the corners happened due to trapped air and a very-long soak time in the kiln. She hadn’t seen this “plaid” pattern done before and was delighted when it came out of the kiln:
And finally, with my best photo prop:
No, no, this is not Jabo’s new dog dish!
Yesterday Armando, Cynthia, and I made three birdbaths. We saw a how-to on the Internet and as we had some appropriately-large leaves, we decided to give it a go.
Step 1 — make mounds of sand and place the leaves upside down on the sand:
Step 2 — Trowel some mortar (we used a polymer additive to keep the birdbaths from cracking) onto the leaves.
And here’s where I mention an “oops” the last time I cut Cyn’s hair with the wrong guide on the clippers. This is the first photo she’s allowed since it happened.
Step 3 (not shown) — cut a piece of 1/8″ wire screen for each leaf. Set the screen on top of the mortar and add another layer of mortar, working the mortar through the holes in the screening. Make a leaf-like texture on the back and walk away for a day:
Today, I carefully turned the pieces over and removed the leaf that we used as a mold. I cleaned the edges with a wire brush. We still need to add a bit of mortar touch-up here and there:We’ll place the “leaves” on top of some round concrete blocks, add water, and watch the birds enjoy their new birdbaths.
As companion pieces for the birdbaths, we had some old, glass fish-net floats that we needed to do something with. The glass globes were covered with a small-diameter rope netting, which I cut off. The glass balls now make a nice feature in the garden. We have two of them:
Armando completed the drainage ditch on the north side of the house. Now more ferns can grow here.
Lastly for this post, one evening we had a visitor at our front windows. No wonder some of our plants are missing leaves! I’ve seen critters this big pinned to boards in museums, but never live and in person:
Here is the underside of the critter as it tried to climb the window:
The number of significant tasks is dwindling! The only two large items remaining, things that will take more than a day or two or three each, are to build out the kitchen cabinets and to pour concrete and install tile on the carport floor.
When I build the kitchen cabinet doors and drawers, I want to work outside in the carport so that I’m not breathing a lot of sawdust. But I’d like to work on a nice floor rather than on the dirt that is there now. But I can’t pour the floor yet because it is the dry season and there is no sand and gravel running in the rivers to make concrete with. So these items are on hold.
In the meantime, I have decided to tackle remaining projects in order of their greatest visual impact. For example, painting large areas will make a larger impact than installing a light switch. After so long at it, we really need the illusion that the project is moving along rapidly.
With this guideline in mind, I made an ordered shortlist of projects.
I decided to start with painting the walls in the loft. Some time ago I had prime-painted the container wall that divides the loft from the roof deck. The knee wall overlooking the living/dining room was still raw stucco. Cynthia and I decided to continue the same warm, medium-gray that we have used elsewhere in the house. I went to work.
I spent four days in the loft and it has made quite a difference. Cynthia is using the loft as her hot-glass studio so I had a few things to work around. The loft sure looks a lot better now. Here is a photo taken from the east end. The screened openings at the roof line are open year round; they suck the rising hot air out of the house:
Cyn was looking for a way to store sheet glass, so we came up with the idea to make racks from plastic cutting boards and quarter-inch rebar. One important storage issue for her is that different glasses have different coefficient-of-expansion (COE) ratings. You can’t mix ratings or your glass will crack. Now she can keep these COEs separated, each COE in its own rack. Here are three of the four that I made for her:
I made a template and drilled holes in the cutting boards.
Here is a photo of the loft from the west end:
Over the seven years that we have been here, we have really culled and re-culled our possessions. Beyond art supplies, kitchen equipment, and the typical clothing and linens, we don’t have much left. We need to find a place to store a couple boxes of family treasures that you see in the foreground.
As I worked my way out of the loft and around to the stairs, we realized how badly-worn the charcoal paint looked in the stairway and in the dining room. I spent another day two-coating these walls. It made quite a difference:
In the photo above, you may have noticed the two sconce lights that Cynthia made and I installed on the wall. Here is a closeup with the light off:
I used L hooks to mount the glass to the wall.
And here is a photo with the light on (daytime). The triangles of glass match the triangles on the chandelier over the dining room table:
We used 4-watt LED bulbs in these fixtures.
The next visually-important area to paint was the window and door framing on the west wall of the living room. I’ve been avoiding this because, well, it promised to be a tedious task. But the order of the list is the order of the list and so I began.
Preparation work is a large part of painting almost anything; I sanded, wire-brushed, and cleaned the long-ago primed metalwork and ran beads of urethane caulk at adjoining joints and seams. Then I spent a day re-prime painting everything, including all the metal rivets that had never been painted. As of this writing, I am most of the way through the project, just two top-coats of gray to go on the sliding doors:
Cynthia dragged me to Westland Mall to buy some new work clothes. I guess I was looking quite shabby — she likes her workman to be smartly dressed. I’ve had a difficult time finding comfortable shoes for my old, arthritic feet, but so far I really like my new Nike Air running shoes.
So far no paint on the new clothes…
Here is a photo looking from the loft to the upper west wall windows:
The sink comes in handy for Cyn’s studio and also for rinsing dishes from the roof deck BarBQue.
Although I’m not done with painting the west wall of the living room, I had to wait for paint to dry, plus the afternoon sun was in my eyes. So I moved on to the last remaining large area to paint — the master bedroom. Because we didn’t want to sleep in all the toxic paint fumes, we relocated to the second bedroom, which is nice because the bathroom there is fully-functional including the shower. No photos of the master bedroom yet.
In other news, Cynthia continues learning and enjoying working with fusing and slumping glass. She has a few new projects to show off including this bowl:
This bowl has some transparent seams and adds dimension to the glass. Here I held the bowl up to a window:
Cyn is gaining enough confidence and quality of execution that she is almost willing to sign her name to her work and even part with some!
Here is a tray that she made from stacks of different color glass. The effect is called mosaic and is made like a pyramid, making numerous stacks of five pieces of glass each, and then slumping the assemblage in the kiln:
Using the same technique, Cynthia made organically-shaped cabochon beads that she will wire together to make a necklace:
Unintentionally, the sparkly frit created “faces” on these pieces.
The next photo is of a bowl. To me it feels primordial, elements swirling in The Great Nebula or perhaps plankton and primal fishes in the depths of the ocean. But it is art — you decide:
Cynthia would like the ability to grind and polish some of her glass creations, so in my free time I’ve been building her a lap grinder. These things can be bought, but I can build one for a fraction of the cost.
A motor (that I don’t have yet), will spin a one-quarter-inch thick, twelve-inch-diameter aluminum disk, on which she will put various-grit diamond disks. I made the stand with PVC plumbing fittings. Still to do is to buy and mount the motor, make provisions for a small water pump, and construct a water-splash apron. For the top, I used an aluminum, large baking sheet. Here it is so far:
One of the downsides of living in the tropical mountains of Panama is the termites and the rust. A few years ago, I think I posted a photo, I made 48 wooden drawers and a metal rack to house Cynthia’s 1,500 watchmaker’s tins full of seed beads. Well, over the years the termites have reduced the wooden drawers nearly to dust and the tins have started to rust. What to do? We purchased a bunch of aluminum, full-sheet baking trays to hold the tins. In time, I’ll build a new cabinet to hold the trays. So for four days, and one remaining to go, Cynthia and our maid have been cleaning each-and-every one of the 1,500 watchmakers’ tins and moving them to the new trays. It has been a tedious, onerous task but will be worth it in the end. The living room is in disarray from my painting and from the stacks of trays:
But one of the wonderful aspects of living here in the tropical mountains of Panama is the multitude of bird life. With my smartphone, I recorded three very-short MP4s of birds.
First, an owl just before dawn:
Second is a flock of wild parrots that flies through most mornings around 6:30 and then later in the day:
And third is a toucan in a nearby tree. Not as good of a recording because Armando was trimming bushes nearby. Toucans sound a lot like frogs:
Finally, I have been chomping at the bit to make some videos of the house. But I’d like my work to be a bit more professional looking than just walking through the house with a jittery camera. Friends are coming to visit us in two months, and although they don’t know it yet, they are going to bring with them a few small items that will make my videos much better looking. I won’t promise cinematic quality, but I think that I can improve a lot on my previous attempts. You’ve been asking for videos, so stay tuned.
This last month we have attended to a slew of finishing- or almost-finishing touches.
I’ve done a lot of plumbing, including connecting two toilets, two showers, three sinks, and a bunch of faucets. Working under the house is pleasantly cool, if not a bit cramped. Here is some of the new plumbing:
Inside the house, I have nearly completed the bathroom off the second bedroom by installing the toilet, shower trim, sink basin, faucet, mirror, and lights:The curved shower rod in the photo above created a challenge. The rod came in two pieces but the kit offered no way to connect the curved section to the straight section. Wandering around in my shop, I found a two-foot-long piece of 3/4″ PVC electrical conduit. The diameter of the conduit was too large to fit into the shower rod. But using the table saw, I made a couple slices down the length of the conduit. I could then compress the conduit and push it snugly into the aluminum shower rod, connecting both pieces of rod with this plastic spline. The fix is snug and won’t rust. Here it is, ready to slide the second piece of rod over the spline:
Cynthia and I spent a day pulling wires and connecting switches and receptacles in the second bedroom and bathroom. It’s nice to be done with an extension cord stretched from my shop:
Note to self — Punch list item: Install tile baseboards.
In the master bathroom, I installed the toilet, sinks, faucets, and mirrors. I still have some wiring to do and need to connect some piping to the shower.
In the States, you can get glass block end caps. But I have never seen them here in Panama. Time to get creative again. Armando and I were going to pour plain concrete caps, but at the last moment I thought of using a row of rocks to echo the nearby rock wall. Armando did a good job as it was difficult to keep the stack of rocks from falling over before the mortar set:
The container wall in the background still needs to be painted.
Here is the toilet area, all done except to unwrap the lamp shade and wire in the electrical receptacle. The lamp lends a nice touch to the loo:
When we bought the lamp, the fish was swimming to the right. I disassembled the lamp and headed the fish in the right direction.
I installed a gas, on-demand water heater for the two bathrooms and the laundry. It took me some time as I had to cut and thread gas pipe plus solder the copper tubing.
Cynthia has been busy making some pretty flower arrangements for the house:
I keep trying to water this one but luckily Cynthia stops me in time:
One afternoon Cynthia and I heard and saw a lovely bird on our west fence. I quietly made my way to the roof deck and took this photo:
Reader Patricia (in the comments below) identifies this bird as a Blue Crowned MotMot. Thanks Patricia.
Vacation time — Cynthia’s cousin G. and his wife S. came to visit for a bit more than a week. We spent a day here in El Valle, doing some of the tourist things including a visit to our friend Jon’s Butterfly Haven. He was proudly showing off this beautiful new Starry Night butterfly:
And we stopped to visit friends who rescue orphaned sloths. S. was initially apprehensive, but that quickly subsided when she felt how soft and seemingly affectionate the young sloth is:
Eating a favorite red hibiscus flower (locally known as papos).
Cynthia and I had been wanting to return to Medellin, Colombia, so we enticed G. and S. along with us. Getting to Tocumen Airport in Panama City was quite an ordeal — usually a two-hour trip, that day, the first day of school after the “summer” break, took us more than four-hours. The flight is only an hour-and-twenty-five minutes! We were the last to board the plane and the door was closed rapidly behind us.
One highlight of our trip — In the center of Medellin is a thirteen-plus acre botanical garden aptly named, Jardin Botanico. We spent most of a day there. I hammed it up with a fruit vendor while S. enjoyed some fresh mango with lime and salt. The vendor was anxious to try out his very limited English:
Here is a lovely bromeliad:
We enjoyed a wonderful lunch at In Situ, a restaurant situated in the botanical garden. Waterfalls and gardens around the restaurant create a tranquil setting. The food and service was outstanding:
Cynthia and I each had Flor de Naranja, a baked chicken dish that was dressed with an orange sauce, almonds, brie cheese, cocoa powder, pennyroyal, and served on a mound of pureed Peruvian potatoes seasoned with coriander. Geez it was tasty. Others at the table had fruit drinks or wine, but I chose the sangria, a pitcher-full that I couldn’t begin to finish. Drinks, an ample main dish, and a decadent dessert, about $30 per person tip included. The garden and In Situ will be our new destination spot in Medellin! By the way, the restaurant is a non-profit and proceeds go to maintaining the park. Entrance to the park is free to all who want an in-city nature retreat:
Here we are enjoying ourselves at In Situ:
Cynthia took this graffiti photo on the side of a hotel:
Lastly, and of special note, I took the next photo on a shop window in Medellin. I am happy to join the cause against sexual trafficking of underage, vulnerable young women. Human trafficking is a global problem. No man, English-speaking or not, should participate in this reprehensible practice for his own gratification. For the young women, it is a completely destroyed life. Here is a graphic (in English no less) that is posted on many shop windows in Medellin: